MECHANICAL 1.Operation Force :800g Max 2.Stroke : 2.00mm 3.Operation Temp : -20~70 degree centigrade, 4.Storage Temp : -40 to 85degree centigrade; ELECTRICAL 1.Electrical Life : 2000 operations cycles per switch 24 VDC, 25mA 2.Non-Switching Rating : 100mA, 50VDC 3.Switching rating : 25mA, 24VDC 4.Contact resistance : (a) 50 MO max. at initial; (b)100MO max.
after life test 5.Insulation Resistance : 100MO;, 500VDC 6.Dielectric Strength : 500VAC/1 minute 7.Capacitance :5pF max 8.Circuit : Single pole single throw SOLDERING AND CLEANING PROCESSES 1.Keep all switch contacts in their "OFF" position for all
operations 2.WAVW SOLDERING : Recommended Solder Temperature at 500 F
(260degree centigrade) max. 5 seconds 3.HAND SOLDERING : Use a soldering iron of 30 watts, controlled at
608 F (320degree centigrade)approximately 2 seconds while applying
solder 4.CLEANING PROCESS : Flux clean using force rinse, high agitation
or triple bath cleaning method. Freon TF or TE give excellent
results. When vapor methods are used do not subject the switch to
solvents at temperature above 125 F (51°ree centigrade) MATERIALS 1.BASE:ENGINEERING PLASTIC,Black 2.COVER:ENGINEERING PLASTCs,Red or Blue 3.BUTTON:ENGINEERING PLASTICS, White 4.TERMINAL:Alloy Copper,Gold plating PACKING All DIP Switches are shipped in standard IC tubes with all poles in
the "OFF" positio